Wednesday, August 5, 2015

MORE PITTSBURGH - AUGUST 2015

Hot Metal Car in Pittsburgh.  Smaller 4 axle version.  Not going anywhere by looks of it - track has been cut off from main and recently it looks like someone stole the journal box covers on the opposite side.    Also looks like homeless using it as a bedroom.  Sad sight.
Interior of Hot Metal Car


Shenango Cokeworks Neville Island

Chambers McKee Glass    Jeanette, PA

Saturday, August 1, 2015

WEIRTON, WEST VIRGINIA - PA TROLLEY MUSEUM

Blast Furnace at Weirton Steel

 Armco Steel unit B-73  - A Baldwin Westinghouse locomotive built in 1930.  Still operational, located at the Pennsylvania Trolley Museum in Washington, PA.

Back to Weirton - Blast Furnace Cast house 
GE Critter at Trolley Museum


Porter Critter

Friday, February 20, 2015

HOPPER IN THE HOOD


The industrial park down the street from my house is located on just about the northern end of Conrail Shared Assets Hainesport Industrial Track.  Formerly a PRR through line, this railroad has been cut back to Mt Holly, but is only serviced as far as Hainesport.    Despite being at the dead end of an "industrial track", Hainesport is quite busy in terms of rail traffic - enough for one train each weekday to make the run up from Camden, usually dual GP38-2s with at least a dozen cars, sometimes many more.     This very small industrial park receives wine in refers, steel coil in coil cars (the right door on the blue building in background),  plywood, rebar, and steel on flats, gons and center beams for a team track, and outgoing many many large trash gons and skeleton flat cars with garbage containers.    The industrial park itself is served by the independent Hainesport Industrial Railroad - a track mobile - and in reality a scam to enable a trash to rail operation without local or state regulatory oversight (not that I object)   There is an additional customer in Hainesport, but not in the industrial park, a creosote plant, or whatever the substitute is to treat power poles.  This is still served by Conrail Shared Assets, receiving log cars.    Add a very large paper distributor down the track in Mt Laurel that usually has up to a dozen or more box cars spotted, there is an interesting mix of traffic to see, and, unlike most of the rest of New Jersey, not a covered hopper or tank car in the mix - its an all-natural railroad - trees, wood, steel, paper, and booze inbound,  trash outbound.

So, despite a semi predictable array of freight cars there is occasionally an interesting visitor, like EAMX 303, shown above.   (I once thought I saw a G-39 ore jenny at night on the local, but could have mistaken it I guess)    Since the pipe mills closed in nearby Burlington and Florence a few years ago, hoppers are rare, and even rarer, single hoppers.    I'm not sure what this was delivering or picking up - maybe they were trying it out with trash? but there is a STEEL connection.  This car was originally owned by the Cambria and Indiana Railroad, a Bethlehem Steel railroad, and used to haul coal from Bethlehem Steel mines to coke plants at their mills.    The car was of course also built by the Bethlehem Steel Company in 1980.

Saturday, January 24, 2015

NEW YEAR, DWARF SIGNALS

Happy New Year to All.

I apologize for no updates for sometime.  The modeling bench has been collecting dust as I work 7 day weeks and very long days/nights.   Despite adding a few more carpenters we have been swamped with work over the holidays and at least for the next two months or so.   We took a brief weekend break in mid-December for a short antique shopping getaway.   One of my purchases was a Union Switch and Signal train crossing signal light - basically one of the flashing red lights  (of two).  It's in ok shape and functions - I plan on welding up a mounting bracket and maybe put on a pole outside, or inside possibly too.  



Purchasing this signal got me interested in signals in general.  Something I had never really read much about, other than just knowing what the different types looked like, and having a sense of what railroads used which types.   After learning a bit more about this subject I sort of became curious about collecting a few more  - move forward a week - and I'm now the proud owner of an Union Switch and Signal N-3 Dwarf Signal, and a Union Switch and Signal H-2 Searchlight Signal (signal only, not the mast)   This isn't an especially inexpensive thing to collect, but not unreasonable for what you get in my estimation.  Railroad items in general are way over priced given there is so much out there, and fewer collectors out there.  The same goes with model railroad items too.   Ebay is a joke in that it used to be an auction site, but most sellers, and especially sellers of train related items, just set the starting bid at what they ultimately want to get for the item, which is usually some inflated value that they have in their mind anyway.   I've sold hundreds of items on eBay including a sailboat and a diesel truck and never had a starting bid higher than 99 cents and never put a reserve on anything, and guess what - I always got at least what I wanted for the item.  There are reasonable deals on there, but you just have to find them - and don't give those people that set the price high business.    Anyway enough of my eBay rant.  

All the signals work so my intention is to connect them to a power source and probably build and program an Arduino micro controller to randomly change signal aspects.   But first, I need to build a base for the N-3 Dwarf Signal.  The signal is maybe 3' tall but cast iron and heavy.  It has a small baseplate with two slots for bolts - slots as signals need to be aimed precisely  (something else I learned)   I'd like to just leave the signal as shown, however, it's very precarious.  A gust of wind could knock it over and send 100 lbs of cast iron into my hardwood floor.    So it needs a base.  I thought of making one out of concrete to imitate the small pedestals you see them mounted on next to the railroad tracks, but was worried about the concrete inside, on the floor etc.   Wood is something I can work with easier.  Using some scrap parallam beams as a core, and for weight since they are heavy, I built an MDF shell around, which I will paint to simulate concrete.


Thursday, November 27, 2014

HAPPY THANKGIVING

Thanksgiving at the shore as usual.   A recent nor'easter had uncovered some railroad tracks buried in the sand at Cape May Point, so we shifter our Thanksgiving Day walk on the beach from Avalon to Cape May.    The tracks were associated with a sand mining plant at the point which closed in the 60's or 70's.  Sand was dug along the beach and hauled by rail to the wash plant and rail car loader located about a 1/4 mile east from these tracks.  The plant was effectively the southern end of the Pennsylvania-Reading Seashore Lines trackage.  Located in the dunes, a hundred feet or so from the ocean, you couldn't really go any further south in New Jersey.     This looks to be only a section of track and not a continuous line that got buried.  My guess is either a storm buried the track and they just removed the unburied trackage and shifted the line, or they were in the process of moving the track sections to mine another strip of beach and this one got caught in a storm.    It looks narrow gauge in this shot, but the rail has just shifted off the ties.    The section of rail is in a tidal outflow which generates mini-rapids during the outgoing tide.    Who knows how long it will be before it is covered again


Sunday, November 2, 2014

ANOTHER WAYNE COLE STEEL BOOK - GHOST RAILS XI



A few weeks ago I received an announcement from Wayne Cole that his newest Ghost Rails - Volume XI was finished and available for purchase.   Like Volume X this is another large hardbound box devoted mostly to the steel industry in the Shenango Valley.    I promptly ordered and received a copy last week.

If you aren't familiar with these books, Mr. Cole I believe self-publishes them.  Most are related to forgotten railroads, traction lines, and industry in western PA/easter OH.   Because they are self published I've heard some criticism on things like photo quality, organization and editing, and lack of maps and visual aids.  These are valid issues - Mr. Cole even goes so far as to acknowledge them.  In his preface he writes: "Volume 11 is complex and confusing in areas" and suggests having the content guide and a topo map handy while reading.   Despite this, these books have been my favorite steel industry related reading.  The books are full of photos and descriptions of processes and rail movements within the mills.   At a base level, this is what I personally want to know about the steel industry.   For example, the history of a certain mill, say a rolling mill is interesting - when it was built, who designed it,,...etc...  but I also want to know how the raw steel for that mill is delivered and handled, and how the rolled products are shipped and where too.  These books are full of this sort of info.  So far I've leafed through twice and read most of the captions and looked at the photos.  Like Volume X it will take me a month or two to really go through the book.  Well done again Mr. Cole.

Forthcoming Volumes are to cover Youngstown (XII) and Warren (XIV)

Monday, October 20, 2014

Coincidences.........

Sorry for lack of blog posts of late, but business is growing too fast and spend most of my waking moments trying to keep up.   An opportunity presented itself for a last minute weekend getaway this past friday.  Hastily planned, we resolved to go somewhere within a few hours driving distance that we haven't been before - difficult given that we mostly travel within a few hours of our house on our weekend getaways.   Since we like antique stores, I consulted the guides I keep on my desk and found a cluster of antique stores around Hagerstown, MD - Gettysburg, PA.  I'd been in the area before with my son when we used to do father and son Civil War battlefield trips when he was little, but never with my wife and not for shopping purposes.   About halfway there I got recalled that the regional NMRA convention was possibly in Hagerstown, although I also thought maybe Virginia, and I wasn't even sure which weekend.  Well it was this weekend and was in Hagerstown.  So I guess I could have gone, but since it was a last minute call,.....  

We had a great weekend - bought lots of industrial artifacts - ate mostly good food - and saw some new towns and villages.   I stopped at the Western Maryland RR Museum in Hagerstown  late Saturday afternoon after a jaunt down to West Virginia, and bumped into now fewer than 4 model railroaders I knew.   They probably think I've lost a few marbles with my explanation at how I ended up in Hagerstown the same weekend as the convention.

Besides the antiques, the posted photo's show a real neat find in the C&O Canal Park at Williamsport, MD.   This is probably one of the neatest little moveable railroad bridges I've ever found and it cries out for modeling.   The bridge was built by the Western Maryland Railroad in 1923 to access a newly built power plant built on the strip of land between the canal and the Potomac.  The canal was still in use at the time so the bridge had to be built in a way to allow clearance for both the canal boats and the mules and towrope pulling them.  This led to the unique configuration shown in the photos.  Ironically there was extensive flooding the winter after the bridge was completed and the canal never reopened.  The bridge was only raised a few times to protect it from later floods.  The spur was abandoned in the early 1970's when the plant switch to truck deliveries of coal.